Updated
How to reset the Meta glasses charging case
The case is its own small device, with a battery, charging contacts and firmware, and it can get stuck separately from the glasses. A case reset is worth trying when the case will not charge the glasses, shows a charging error that cleaning and a new cable don't clear, or behaves oddly after an update. There are three different methods. Ray-Ban Meta and Oakley Meta use a long press on the back button. Meta Glasses use a button inside. Display uses the USB-C cable itself.
- Factory reset the charging case (Ray-Ban Meta / Oakley Meta)
- Factory reset the Meta Glasses charging case
- Factory reset the Meta Ray-Ban Display charging case
Factory reset the charging case (Ray-Ban Meta / Oakley Meta)
For Ray-Ban Meta (Gen 3), Ray-Ban Meta Optics (Gen 2), Oakley Meta Vanguard, Ray-Ban Meta (Gen 2), Oakley Meta HSTN and Ray-Ban Meta (Gen 1).
- Remove your glasses from the case.
- Press and hold the button on the back of the case for more than 16 seconds to factory reset the case.
Tab: Ray-Ban Meta and Oakley Meta glasses.
From Meta's help center, checked 2026-10-05.[1]
Factory reset the Meta Glasses charging case
For Meta Glasses (Adventurer, Fury, Starfire, Capri, Nova).
- Remove your glasses from the case.
- Press and hold the button on the top right of the charging pad inside the charging case for more than 16 seconds to factory reset the case.
Tab: Meta Glasses.
From Meta's help center, checked 2026-10-05.[1]
Factory reset the Meta Ray-Ban Display charging case
For Meta Ray-Ban Display.
- Open the case.
- Insert and remove the USB-C cable from the USB-C port on the ridge side of the case 3 times within 11 seconds.
- The LED next to the USB-C port blinks white when the reset is successful.
Tab: Meta Ray-Ban Display.
From Meta's help center, checked 2026-10-05.[1]
Tips
- Take the glasses out first. Meta's steps for every case start with an empty case.
- Rule out the charger before resetting. Meta says to use a USB-C cable rated at 1.2A or more and an adapter of 5W or greater; USB-PD is not required.
- On Display, the three cable insertions must fit inside 11 seconds. If the LED by the port doesn't blink white, start again.
Questions people ask
What does a red blinking case light mean?
Meta calls it a charging error. It lists liquid on the contacts, high temperature and an incompatible charger as causes: wipe the contacts, move the case somewhere cooler, or try another cable and adapter. See case lights.
More how-to guides
- How to factory reset Meta glasses (and the Neural Band)
- How to restart or force restart Meta glasses
- How to connect Meta glasses to an iPhone or Android phone
- How to unpair Meta glasses from your phone
- How to turn Meta glasses on and off
- How to charge Meta glasses, the case and the Neural Band
- Meta glasses charging case lights, decoded
- How to take photos and record video on Meta glasses
- How to update Meta glasses software
- How to make Meta glasses battery last longer
- How to change the Meta AI voice and language on your glasses
- How to use live translation on Meta glasses
Sources
- How to factory reset AI glasses and charging case(meta.com, read 5 October 2026)
Last verified 5 October 2026 against the sources listed on this page.